[v13.0] SSD Fresh – Fast optimize your SSD performance with one-click

This article along with all titles and tags are the original content of AppNee. All rights reserved. To repost or reproduce, you must add an explicit footnote along with the URL to this article!
Any manual or automated whole-website collecting/crawling behaviors are strictly prohibited.
Any resources shared on AppNee are limited to personal study and research only, any form of commercial behaviors are strictly prohibited. Otherwise, you may receive a variety of copyright complaints and have to deal with them by yourself.
Before using (especially downloading) any resources shared by AppNee, please first go to read our F.A.Q. page more or less. Otherwise, please bear all the consequences by yourself.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Solid-state drives (SSD) have obvious advantages than the traditional mechanical hard disk drives (HDD), but do not mistakenly believe that an SSD does not need optimization. However, for the optimization of SSD, many users may just know one optimization setting – a new SSD should be formatted with 4K alignment. In fact, SSD actually has a lot of places that can be optimized for making its speed faster and service life longer.

There are dozens of key points for SSD performance optimization, and most of which can be finished manually. But it is best to use some special tools to achieve this work. For Intel SSD, you can use Intel SSD Toolbox; for Samsung SSD, it’s Samsung Magician; for Transcend SSD, the similar tool is SSD Scope, and so on. However, many other brands of SSD do not officially provide a dedicated SSD optimization tool. This case, we can use some 3rd-party SSD optimizing programs, such as Abelssoft‘s SSD Fresh from Germany.

SSD Fresh is a universal and professional SSD optimization tool. It can minimize the times operating system writes to SSD and counterbalance the distribution of writing area to an extreme, thus greatly boosts the SSD performance and prolongs its service life. Its working principle is to enable/disable some system options or functions associated with SSD performance & life. For example, disable Indexing, disable Prefetch, enable Windows Trim function, enable AHCI mode, stop Windows Event Log service, disable Defragmentation, disable Defragmentation of boot files, disable 8.3 name creation (short filename), close Timestamp, disable System Restore, etc.

Additionally, SSD Fresh also can be used to display all kinds of information of SSD, including: hard drive name, drive letter, disk size, partition size, number of partitions, file system of partitions, disk usage, S.M.A.R.T. data.

// Key Features //

  • Adjust the system to the SSD
  • Avoid write access
  • Increase performance
  • Optimize SSD Settings
  • View drive information
  • View S.M.A.R.T. data

// System Requirements //

  • Microsoft .NET Framework 4.0+

// Edition Statement //

AppNee provides the SSD Fresh Plus Edition multilingual full installers and unlocked files, portable full registered versions, as well as pre-activated full installers for Windows 32-bit & 64-bit.

// Installation Notes //

for Setup versions:

  1. Download and install SSD Fresh, do not launch it now
  2. Copy the unlocked file (if there is) to “C:\ProgramData\Abelssoft\SSDFresh\Program” and overwrite
  3. Done

// Prompts //

  • You need to run SSD Fresh as administrator

// Download URLs //

License Version Download Size
Plus Edition v13.0 4.15 MB

(Homepage)

If some download link is missing, and you do need it, just please send an email (along with post link and missing link) to remind us to reupload the missing file for you. And, give us some time to respond.
If there is a password for an archive, it should be "appnee.com".
Most of the reserved downloads (including the 32-bit version) can be requested to reupload via email.