Tag Archives: printing slicing

[v4.1, v4.0] Simplify3D – Make your 3D printer work better

This article along with all titles and tags are the original content of AppNee. All rights reserved. To repost or reproduce, you must add an explicit footnote along with the URL to this article!
Any manual or automated whole-website collecting/crawling behaviors are strictly prohibited.
Any resources shared on AppNee are limited to personal study and research only, any form of commercial behaviors are strictly prohibited. Otherwise, you may receive a variety of copyright complaints and have to deal with them by yourself.
Before using (especially downloading) any resources shared by AppNee, please first go to read our F.A.Q. page more or less. Otherwise, please bear all the consequences by yourself.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Simplify3D is a powerful and easy-to-use 3D printing & slicing software that is able to control over all aspects of the 3D printing, also regarded as one of the best three 3D slicing software available at present (the other two are free Cura and open-source Slic3r). It supports the import of different types of files, as well as the export of G-code and X3G slice files, and supports most desktop and DIY 3D printers in the market!

Continue reading [v4.1, v4.0] Simplify3D – Make your 3D printer work better