|Ⅰ||This article along with all titles and tags are the original content of AppNee. All rights reserved. To repost or reproduce, you must add an explicit footnote along with the URL to this article!|
|Ⅱ||Any manual or automated whole-website collecting/crawling behaviors are strictly prohibited.|
|Ⅲ||Any resources shared on AppNee are limited to personal study and research only, any form of commercial behaviors are strictly prohibited. Otherwise, you may receive a variety of copyright complaints and have to deal with them by yourself.|
|Ⅳ||Before using (especially downloading) any resources shared by AppNee, please first go to read our F.A.Q. page more or less. Otherwise, please bear all the consequences by yourself.|
|This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.|
Slic3r is a lightweight, free and open-source 3D printing & slicing software developed by Alessandro Ranellucci from Italy (written in C++). Its comes with powerful functions, yet is convenient and simple to use. As one of the most professional and one of the few 3D printing programs, Slic3r’s slicing speed is 100 times faster than the early Skeinforge, so it can definitely meet your high-tech 3D slicing needs.